Mathematical Modeling of Urban Population Changes Essay

Mathematical Modeling of Urban Population Changes Background of Issue The growth of population is the issue that caused widespread concern in the world now. As the world’s top 1 populous country, China’s population problem becoming more prominent. Because of the base of large population, although China has implemented the one-child policy to practice family planning, population is still increasing greatly. This huge population pressure has brought a series of problems on China’s social, political, economic, health, employment, etc. therefore, research and solve the population problem is particularity important for China. [3]Usually people will notice that in newspapers about population growth forecast, when it comes to the end of this†¦show more content†¦[1] |Year |1988 |1989 | | | | (million) | difference | |1992 | 1158.23 | 1156.16 | 2.07 | |1993 | 1171.71 | 1169.14 | 2.57 | |1994 | 1185.17 | 1182.26 | 2.91 | |1995 | 1198.50 | 1195.53 | 2.97 | |1996 | 1211.21 | 1208.94 | 2.27 | |1997 | 1223.89 | 1222.51 | 1.38 | |1998 | 1236.26 | 1236.23 | 0.03 | Implication of the results As the natural population growth rate for these years is 0.01116 at average, this modeling reflects the actual situation well. According to the forecast, until 2016 China’sShow MoreRelatedThe Effect of Climate on Suicide Rates Essay examples1502 Words   |  7 Pagespsychology, and sociocultural factors influence the probability for suicide in individuals and populations. Strong evidence demonstrates that suicide rates vary across regions, and that this variation is reliably stable over time, holding true both between and within particular countries. The extent that climate may exert an impact on the propensity for suicide in particular individuals and populations, increasing knowledge about such a tendency would have significant implications for policiesRead MoreThe Epidemic Of Ebola Hemorrhagic Fever1893 Words   |  8 Pagesepidemics, assess efficiency of countermeasures, and optimize the efforts directed towards provision of biological safety. Mathematical modeling has emerged as an important tool for gaining understanding of the dynamics of the spread of infectious diseases. The need of accurate models describing the epidemic process are vital, because infectious diseases outbreaks disturb the host population and has ï ¬ nancial and health consequences. There is also the need to use sound statistical analysis methods to testRead MoreDiscuss the Impact of the Automobile’s Rise on Urban Form During the Twentieth Century and Critically Evaluate Planning Measures Used to Limit the Negative Social and Environmental Aspects1691 Words   |  7 Pagesautomobile’s rise on urban form during the twentieth century and critically evaluate planning measures used to limit the negative social and environmental aspects Since the rise of the automobile, there have been many dramatic changes to urban form in attempts to accommodate this new mode of transport. Focusing on America and Britain, this discussion considers influences on all scales ranging from reclassification of physical roads to the decentralization of urban cores. The risingRead MoreA Multi Agent Cross Platform Modelingand-1952 Words   |  8 Pagest [5], a technological infrastructure for facilitating participatory simulations [6], run these activities with participants, and discuss learning experiences afforded by these activities. INTRODUCTION NetLogo [3] is a multi-agent programming and modeling environment for simulating complex phenomena. It is designed for both research and education and is used across a wide range of disciplines (e.g., Figure 1, across) and education levels. NetLogo NetLogo’s â€Å"low-threshold, high-ceiling† design philosophyRead MoreImplementing Technology in the Mathematics Classroom2361 Words   |  10 Pagesintegration barriers at the school. In this second phase of this research, the focus would be on different types of computer resources and mathematical software technologies that could integrate in the context of teaching and learning mathematics. Recommendations In order to integrate and to enhance technology use in education, recommendations for effecting change over the long term should include improving classroom access to internet, hardware, software, and strengthening technical and administrativeRead MoreThe Theories Of Cognitive Development On The Curriculum And Instructional Strategies Used Within The Targeted Instructional Setting2170 Words   |  9 Pagestargeted instructional setting and a justification for the recommendation. Wy’east Middle School (Wy’east) is the targeted instructional setting for this paper. Wy’east is an urban middle school that serves grades six through eight. Wy’east is a Title 1 school in Step 5 of the school improvement process. Wy’east has a population of approximately 851 students comprised of 449 male and 402 female students. There are 18 different home languages spoken. Approximately 54% of the students qualify for theRead MoreSpatial Dynamic Optimization Of Water Use And Management Behavior7350 Words   |  30 Pages Key Words: Bi-level Programming, Water Management, Spatial Dynamic Optimization Introduction The management and use of water in urban areas is a complex and dynamic issue. Water managers must juggle the goals of regulating water demand, with securing and improving access to good quality water for their jurisdiction areas. As demographic and hydroclimatic changes force a shift in the focus of water management from supply expansion to improving management of existing water supply systems (HarouRead MoreKkkkkkkkkkkkkkkkkkk6406 Words   |  26 PagesMECHENG 587 MECHENG 588 MECHENG 589 Lean Program Engineering Designing in Quality Production Systems Engineering Design for Manufacturability Introduction to Robotics Global Product Development Laser Materials Processing Global Manufacturing Assembly Modeling for Design and Manufacturing Ecological Sustainability in Design and Manufacturing 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2. Energy and the Environment AUTO 533 Advanced Energy Solutions CEE 567 Energy Infrastructure Systems ESENGRead MoreUsing Stepping Stone and Modi Methods to Solve Transportation Problems9897 Words   |  40 Pagesto use mathematical models and scientific algorithms in the scheduling and assignment of organizational resources for the purpose of optimizing the use of organizational resources is necessary in order to bring about maximum utilization of resources to yield productive improvements more especially in the transportation sector. 1.3 Justification to the study: According to Advani and Tiwari (2006), Transportation demands in urban areas continue to increase rapidly as a result of both population growthRead MoreIgnou Eso-11 Free Solved Assignment 20124877 Words   |  20 Pagessociology has given sufficient attention to the study of primary units of social life. In this area, it is concerned with social acts and social relationships, individual personalty, groups of all varieties, communities (urban, rural, and tribal), associations, organisations and populations. Thirdly, sociology has been concerned with the development, structure and function of a wide variety of basic social institutions such as the family and kinship, property and religion, economic, political, legal,

The Battle Of The French Revolution - 1569 Words

THE BATTLE OF WATERLOO Introduction On June 18, 1815, the last battle of Napoleon Bonaparte called The Battle of Waterloo took place in Belgium. Napoleon lived from 1769-1821. He was the French military leader and emperor. Through his ingenious military tactics, he took over much of mainland Europe in the early 19th century. The French Revolution (1789-1799) was a time of unrest. Napoleon took advantage of the unrest and was able to progress up through the ranks of the French army. At the end of the French Revolution, Napoleon had gained control of the French government in 1799. Five years later Napoleon crowned himself emperor in 1804. Napoleon eager to expand his empire, engaged in a series of wars across western and†¦show more content†¦Napoleon’s parents despite being Corsican nobility were not wealthy. Napoleon did not grow up wealthy, and this may have led him to join the French military academy. Napoleon graduated the French military academy in 1785. He soon joined the art illery regiment of the French army. In 1789, there was much rife and discontent of the French monarchy and the French Revolution ensued. The French monarchy was overthrown in three years by the revolutionaries and proclaimed France a French republic. The revolution lasted 10 years, and Napoleon improved his military prowess through the revolution and rapidly rose through the ranks of the French army proving himself an accomplished and audacious leader. In a coup d’à ©tat, Napoleon seized political power of France in 1799. He gained the title of first consul and was France’s leading political force. In an opulent ceremony, Napoleon crowned himself emperor in 1804 . Napoleon’s hunger for more power and the expansion of the French empire lead him in a string of victorious battles against several leagues of European nations. Napoleon expanded much of the French empire across western and central continental Europe. Planning and Preparation As Napoleon sought to expand to the east, he met the nation of Russia. Napoleon sought to conquer Russia because they had not kept the embargo placed on

Business Regulations Free Essays

Business Entities, Laws, and Regulations Paper Dorian Rowe BUS/415 Shaun Koenig November 14, 2011 Businesses in every industry have to deal with entities, laws, and regulations. Management teams have to take into account items such as consideration of control, taxation, and liability issues among others. The purpose of this paper is to discuss the restaurant/bar, professional practice, and construction scenarios. We will write a custom essay sample on Business Regulations or any similar topic only for you Order Now For each scenario the business entity that represents the best choice for each business, ownership structure, taxation, and liability issues for consideration. Identification of laws and regulations each business must consider in starting the business, and identification of risks against which each business must protect itself will also be examined for each scenario. Scenario 1 Cynthia and Mark plan to open a sports bar and restaurant where customers socialize and watch sporting events on large-screen TVs that hang around the bar. They do not have much money, but they do have Sandra, a wealthy investor who does not have time to participate in the business, but wants to provide capital to start the business in return for a percentage ownership (University of Phoenix, 2010). The business entity that represents the best choice for this business is a general partnership that two or more people can form. Taking control would consist with the three co-owners to make a partnership agreement in which each partner has equal rights in which to participate in the managing and controlling of the business. A majority rules over disagreements within the partnership situation and amendments to the agreement would require consent from all three owners. Each individual is responsible for his or her tax forms. Liability issues that should be taken into consideration include the unlimited personal liability for company loses, for a partner’s debts, for a partner’s transgressions. Laws and regulations the business must consider in starting the business deal with duration that technically a general partnership terminates with withdrawal of a co-owner, death or disability and sharing profits. Scenario 2 Renaldo and Naomi have just completed all educational and experiential requirements to be licensed as obstetricians. They want to open a birth clinic together. They will take out a large loan to finance start-up costs (University of Phoenix, 2010). Renaldo and Naomi are newly license as obstetricians and want to open a birth clinic together. Both will need to take out a huge loan to finance their start-up amounts. Renaldo and Naomi would be best to create a limited liability partnership (LLP) to organize their business. By forming the LLP, the partners protect themselves from liability beyond their initial capital contribution should the partnership fail or face a lawsuit. Members of an LLP are also not personally liable for the malpractice of one partner and states require LLP to carry substantial liability insurance in exchange for this limited liability. The limited liability protects Renaldo and Naomi from taking personal responsibility for the loan they will take out should the business become insolvent (Cheeseman, 2010). Forming an LLP ensures that Renaldo and Naomi retain control of their business because they are the only shareholders. For tax purposes, an LLP is not taxed as a separate entity so Akiva Renaldo and Naomi will only pay tax for the business profits on their individual tax returns. To form their LLP, Renaldo and Naomi will need to write and file articles of partnership in the state in which they wish to operate. If they choose to conduct business in another state, they will first need to register as a foreign LLP with that state. Organizing their business as a limited liability partnership offers Renaldo and Naomi the best combination of liability protection, tax benefits, and control of their business (Cheeseman, 2010). Scenario 3 Mei-Lin is the hiring manager for Surebuild, Inc. , a new construction company. She has advertised a position as a jackhammer operator. The position’s description states that the successful applicant must have a high school diploma. The following people apply for the position: Donna, 35, who appears to be pregnant, is a high school graduate, and was formerly employed as a jackhammer operator; Duane, 55, who is experienced with a jackhammer, but has no high school diploma; Rick, who is 38, does not speak English, has no high school diploma, but is experienced with a jackhammer; and Jennifer, 23, a college graduate, who is epileptic and has no experience with a jackhammer (University of Phoenix, 2010). Duane and Rick automatically do not qualify because they do not have a high school diploma that is a specified requirement in the job description. Donna and Jennifer do because they each have a diploma and from there the employee with the most experience should be hired. As an epileptic the Americans with Disabilities Act (ADA) protects Jennifer, but because Donna has experience and Jennifer does not Donna is more qualified. Although Donna is pregnant the employment law and regulation with which the business must comply in making a decision would be the amended 1964 Pregnancy Discrimination Act from the Title VII of the Civil Rights Act. The Pregnancy Discrimination Act covers employers with more than 15 employees including local and state government governments, employment agencies, labor organizations. The basis of pregnancy, childbirth, or related medical conditions constitutes unlawful sex discrimination under Title VII, and to the federal government. The Pregnancy Discrimination Act says that an employer simply cannot refuse to hire a woman who is pregnant because of pregnancy, pregnancy-related conditions or because of the bias of fellow coworkers or customers. In this scenario Donna is fully qualified for the job because of her high school diploma and her previous experience as a jackhammer operator, therefore; pregnancy cannot be the reason she is not hired. Each business decision is unique and requires research to determine what solution is correct for the business. Every organization must consider the different types of business entities, laws, and regulations before and during operating. Laws and regulations provide the framework to compliance of local, state, and federal business laws. Stakeholder understanding and knowledge of these laws is essential to compliance. Documented training and retraining of management and employees should ensure compliance. References Cheeseman, H. R. (2010). The legal environment of business and online commerce (6th ed. ). Retrieved from https://ecampus. phoenix. edu/content/eBookLibrary2/content/TOC. aspx? assetdataid=fb9bdcea-ca02-48cc-b883-c1cf12695559assetmetaid=61859383-2c36-48f5-8ac2-4a24e5c61e14 University of Phoenix. (2010). Syllabus. Retrieved from University of Phoenix, BUS 415 website How to cite Business Regulations, Papers

Importance of Critical Thinking in Higher Education- myassignmenthelp

Question: Write about theImportance of Critical Thinking in Higher Education. Answer: This essay argues about the students critical thinking ability. The essay also argues that the assessment criteria, reliability and validity and challenges that the student faces while going through the thinking process. One must not forget that the psychometric ability not only reveals the candidates aptitude in general but also gives the test maker an insight to indirect analysis of their personality to some extent. The personality behaviour of a candidate is essential aspect to consider a student converted to professional in a workforce. Despite the debate on existing test on critical thinking, tests and ability mappers there are some drawbacks also in those tests. Developing a parameter that can fully measure a human mind and predict the ability is not a 30 minutes process. However, with the development of those students needs to attract and can face challenge in the process. Critical thinking is one of the major skills needed for a student. This not only ensures the right path of thinking but also helps in better decision making in later part in life. With growing skilled workforce, all around the world, the framework of greater education system is using the tools for enhancing ones capability of critical thinking. The objective of having the skill is to analyse a situation with all perspective in mind, without having a bias opinion and then form a judgement in place. This judging supports all the way to making a better decision. The identified key features of critical thinking are discussed below. The problem statement of these study discuses, the assessment criteria of critical thinking and reliability and validity of critical thinking with respect to students perspectives. Further, it suggests the multiple way of critical thinking and challenges and consideration that the student have to take into account of critical thinking. This essay will define and evaluate the different concepts of critical thinking. The planning, adoption and implementation of critical thinking by students are essential for companys using to screen and assess the student(Savery J. R., 2015). Companies these days also plan frameworks for screening candidates ability to think critically in any matter. What are the methods, that needs to be checked by student that will increase their critical thinking ability. In this part of text, analysis, interpretation and assessment criteria of critical thinking is going to be discussed. Burrus and Robins (2013) discussed the core seven frameworks of concerning the general education and competencies important for educating the generation of workforce. Identifying the learning outcomes, questions and analysis with relevant quality of information and considering alternative perspective of solutions needs to be featured characteristics of the students planning to join the workforce and accepting the opinion and conclusion to certain parameters. The value of providing a rubric to an academic student is to make them aware of their thinking assessment. The outline and project outcomes are there to offer critical thinking assessments. Like a study in this research, criteria conducted by the American Philosophical Association (APA) identified that the ancient Delphi method is consensus approach of critical thinking. The discussion of experts divided the criti cal thinking process in six steps. A better decision making is done by interpretation, analysis, evaluation, inferences, explanation, and self-regulation. The decision-making and problem solving skill is a major facilitation of the assessing likelihood of uncertainty (Darling-Hammond, (2015)). Halpern (2012) recognized that the company should focus on the key aspects of critical thinking. This includes the verbal reasoning, argumentative analysis, and making sound decisions and critically thinking in hypothesis testing process. The critical test they discussed in the article has invented a Halpern Critical Thinking Assessment (HCTA) has detail assessment criteria. This was also very interesting read, which explore on the arguments of critical thinking and reasoning. This research in the respected area has also given the effort to some commercially available assessments of critical philosophy of thinking. Another way is of multivariate nature of the critical thinking definition which says that, different themes to be considered, which is the main thing that is going to be discussed now. The different bodies that assures the reliability of critical thinking are California Critical Thinking Disposition Inventory (CCTDI), Watson-Glaser Critical Thinking Appraisals (WGCTA), HCTA, Collegiate Assessment of Academic Proficiency (CAAP) program ensure the operational thinking, reasoning of arguments and evaluation assessment process(Bass, 2012). The mental motivation and integrated with writing and involves metacognition. The assessment test includes the vendor, which is insight for the test taker, the format of taking test like Likert scale. The delivery of test, which ensures the medium the test, must be taken into. The length of the psychometric or aptitude test and the themes that the base the test is formed. The measurement of the test is recognition of the students mental assumptions and deduction capability. The tests mentioned above are also a report that can give insight to the scorecard ability of the students. . The 92% of college graduates are identified to be successful if critical thinking power is more than average in them. The high school students are also reported to be come under the important assessment criteria of psychometric ability power. The body of Assessment of Higher Education Learning Outcomes (AHELO) project, which comes under the Organisation for Economic Co-operation and development (OECD) includes critical thinking learning is a core competency when evaluating the learning outcomes of college pass out students(Darling-Hammond, (2015)). The organisation has contributed to many economical development of countries and have expanded it research in the given critical thinking field. Another way of testing the critical thinking criteria is to consider reliability of the testing criteria. The Construct responses of the students and validity of the measurement CAAP , CCTST and WGCTA and HCTA have combination of multiple choice questions of authentic context of reliability and validity (Bass, 2012). The scale variability and of different pointed scale and length dimension in line can give a supportive not only to the test taker but also the education council for assessment. The internal consistency of the subscales needs to be considered before posing the test to prospective candidates. The score does not need to be generalised, as it will corrupt the scorecard of the respondents. Studies also reported the unstable factor structure and low reliability on some test according some critics for the test CCTDI (McClarty, Orr, P. M., Vassileva, McVay, 2012).The validity scorecard of critical thinking and cognitive measurements, such as SAT or GRE tests are pointed scale that also evaluated the negative aspects of students critical thinking ability. However, this examines the external validity assessors of the candidates. The significant parameters and fewer negative life events come under the validity criteria. The low-moderate-high observation range has significant correlation of appraising observation (Mattern, et al., 2014). Further the challenges and consideration of critical thinking that is essential for students. Designing a test major challenge for balancing the authenticity and of the psychometric ability for a company and it is for screening the candidates. The typical aptitude test is does not reveal any skill proficiency of the candidate. It is often seen that this critical thinking perspectives of candidates is overlooked if a company is in dire need of candidate recruitment. The Klein et. al. (2012) study compared the construct validity of three standardized assessments of college learning outcomes including critical thinking. The school-level correlation between a multiple-choice and a constructed-response critical thinking test was high. . Another challenge of designing a critical thinking test is the different education level of the candidates. The instructional relevance of faculty member and isolation from curriculum and instruction. The more they foster critical thinking specifically the more they use it to reach a common goal(Dwyer, Hogan, Stewart, 2014). Thinking is the most valuable things in a human world; this contentious skill is also needed on everyday part of our lives. According to Association of American Colleges and Universities (AACU), 95% of chief in position of academic officers from 433 different body came to a finale statement that critical thinking is one of the most needed for intellectual qualities in every students and in workers(Yang Wu, 2012). Reference Bass, R. (2012). Disrupting ourselves: The problem of learning in higher education.Educause Review,47(2), 23-33. Darling-Hammond, L. (2015).The flat world and education: How America's commitment to equity will determine our future. Teachers College Press. Dwyer, C. P., Hogan, M. J., Stewart, I. (2014). An integrated critical thinking framework for the 21st century.Thinking Skills and Creativity,12, 43-52. Markle, R., Brenneman, M., Jackson, T., Burrus, J., Robbins, S. (2013). Synthesizing frameworks of higher education student learning outcomes.ETS Research Report Series,2013(2). Mattern, K., Burrus, J., Camara, W., O'Connor, R., Hansen, M. A., Gambrell, J., ... Bobek, B. (2014). Broadening the Definition of College and Career Readiness: A Holistic Approach. ACT Research Report Series, 2014 (5).ACT, Inc. McClarty, K. L., Orr, A., Frey, P. M., Dolan, R. P., Vassileva, V., McVay, A. (2012). A literature review of gaming in education.Gaming in education, 1-35. Nisbett, R. E., Aronson, J., Blair, C., Dickens, W., Flynn, J., Halpern, D. F., Turkheimer, E. (2012). Intelligence: new findings and theoretical developments.American psychologist,67(2), 130. Savery, J. R. (2015). Overview of problem-based learning: Definitions and distinctions.Essential readings in problem-based learning: Exploring and extending the legacy of Howard S. Barrows,9, 5-15. Yang, Y. T. C., Wu, W. C. I. (2012). Digital storytelling for enhancing student academic achievement, critical thinking, and learning motivation: A year-long experimental study.Computers Education,59(2), 339-352.

Bone Healing Stages

Adaptations of trees in the rainforest biomes

Adaptations of trees in the rainforest biomes The trees in the rainforest biomes have developed several adaptations to enable them to survive the conditions in the area. The rain forests receive an average of between 50 and 260 inches of rainfall annually (Denslow, 1987). This means that the plants in that area will need to adapt in order to ensure that they shed water in an efficient way.Advertising We will write a custom essay sample on Adaptations of trees in the rainforest biomes specifically for you for only $16.05 $11/page Learn More Another problem that may be encountered by rainforest flora is that the sunlight that reaches the plants on a lower canopy may be little. There are different layers of canopies. With every layer, there is a drop in the amount of sunlight that reaches the leaves. This means that the plants need to be adapted and they have to device ways of harnessing the little sunlight. One adaptation of the rainforest trees is that they have drip tips on their leaves. This helps the leaves to drop off water from their leaves. The air is very humid and there is a tendency of leaves accumulating water. Another adaptation of the leaves is that they may have grooves on the leaves. This helps to increase the surface area to allow more water to be lost through transpiration. The leaves of the trees in the rain forests may also be oily. This oily coating helps to shed off water from the leaves more efficiently and does not allow it to settle. The barks of these trees are usually thin and smooth. This is because they do not require thick barks to protect them from water loss (Herwitz, 1985). Since these plants receive plenty of water at all times, they do not require deep roots. In order to absorb as much sunlight as possible, the plants have devised ways to increase efficiency. One adaptation is that the rainforest trees have broad leaves. This increases the surface area of the leaves to ensure that more sunlight reaches the leaves. Another adaptation of the leaves is that some trees have leaf stalks that turn. This movement corresponds to the movement of the sun meaning that the leaves follow the direction of the sun and ensure that the maximum amount of light reaches the leaf surface at every moment. Why these trees would not compete well in another biome The rainforest trees have adaptations that limit them from being competitive in other biomes. For example, these trees would not be able to survive in a relatively dry area, let alone a desert. The broad leaves and the grooves on the leaves would increase water loss and that would become a hindrance to its survival. The large surface of the leaves would also mean that there is a larger surface area to allow for water loss.Advertising Looking for essay on ecology? Let's see if we can help you! Get your first paper with 15% OFF Learn More Leaves of plant in dry areas need to have ways of reducing the surface area for water loss and this includes having small leaves and s maller stomata (Dolman, Gash, Robert, Shuttleworth, 1991). The smooth, thin bark would also work against attempts towards water conservation because heat would be able to penetrate and water would be lost since the bark is thin. Since the rainforest trees have shallow roots, such plants would not be able to survive in a dry area since they would not be able to reach the underground water. In dry areas, the groundwater level is usually lower and this means that roots need to go deeper. These plants would not be able to get water and they will simply dry up. References Denslow, J. (1987). Tropical rainforest gaps and tree species diversity. Annual Review of Ecology and Systematics, 18, 431-451. Dolman, J., Gash, J., Robert, J., Shuttleworth, J. (1991). Stomatal and surface conductance of tropical rainforest. Agricultural and Forest Meteorology, 54(2-4), 303-318. Herwitz, S. (1985). Interception storage capacities of tropical rainforest canopy trees. Journal of Hydrology, 77(1-4), 23 7-252.

Do Aircraft Engineer of Oman air believe Inadequate training in Research Proposal

Do Aircraft Engineer of Oman air believe Inadequate training in aircraft Engineering sector of Oman is the main cause of low standards in maintenance of Oman Air aircraft - Research Proposal Example For example, training and development lead to the development of new skills and expertise of employees. However, in some sectors, training and development are necessary for performing the regular activities. Training and development activities present prime opportunities to expand and enhance the knowledge base of the employees. Even so, some employers find the same to be expensive and hence, financial loss of the company. For example, employees often miss out on work timings while attending the training and development sessions and this might delay the completion of project (Kenny & Reedy, 2007, p.121). Despite the potential drawbacks of training and development activities, companies consider these to be a core functional activity (Burke, 2010, p.13). Some of the key benefits of training and development are addressing weaknesses of the employees, improving performance level of the employees, managing consistency in the performance levels of employees and enjoying increased level of employee satisfaction. The significance of training and development cannot be distinguished on the basis of the sector. Hence, irrespective of the nature of business or size of the organization, the significance of training and development is the same all over (Burke, 2010, p.15). This study seeks to investigate the importance of training and development in the aviation sector of Oman. However, the prime thurst will be on the rational behind standard of maintainence. The topic that will be evaluated is: An assessment of the drivers of low standards in the maintenance of Oman Air aircraftin relation to training provision. Therefore, the principal aim of this project is to get an insight into the perception of Aircraft Engineers of Oman, pertaining to inadequate training in aircraft engineering sector, which is responsible for low standards in maintenance of Oman Air aircraft (FICCI, 2012). The objective of the study will be fulfilled by conducting a questionnaire survey among the

International marketing Essay Example | Topics and Well Written Essays - 2000 words - 5

International marketing - Essay Example The process of international marketing engages targeting of the consumers for a particular product in the international market, approaches to enter in the particular country, marketing mix strategies along with strategic business plans to compete in the international market (Onkvisit & Shaw, â€Å"International Marketing: Analysis and Strategy†). From the perspective of American Marketing Association (AMA), international marketing is the global practice of planning and manipulating the inherent strategies of an organization along with the pricing strategies, strategies of promotion and allocation of products, services or ideas that satisfy the consumers along with the organization goals (Onkvisit & Shaw, â€Å"International Marketing: Analysis and Strategy†). The paper intends to study about the various aspects of international marketing which will affect TATA Motors’ cars in the United States market. The study of market analysis with various aspects, such as general information of the US market, social and cultural analysis of the US consumers, economic analysis of the US market as well as political and legal situation of the US has been focused upon through this paper. Market entry strategy of TATA Motors including situational analysis, target market and product positioning along with different features of marketing mix have also been highlighted through this paper. In the present globalised market scenario within the automobile sector, the US car market is one of the most sought after places for the international car manufacturing companies. However, the car market segment of the country has faced deficits in terms of selling units. The sales of personal cars or light weight vehicles were previously 11% in the year 2010 and increased by 10% in the year of 2011. The fluctuating scenario of the US car market signifies the increasing

Project Management individual project Essay Example | Topics and Well Written Essays - 3500 words

Project Management individual project - Essay Example ...........................Page 14 Conclusion†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..........................................................Page 15 References†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦...........................................................Page 17 Introduction The objective of this Report is to explain how industry-standard Project Management tools will be used to ensure that a conversion of the Company’s network of Personal Computers will have their operating systems upgraded from Windows XP (presumably the Enterprise Edition) to Windows 7 (also presumably the Enterprise edition). The main work products from this exercise will be to enable:- a) Planning and monitoring the upgrade. b) Ensuring minimum inconvenience to the staff and clients of the Company. c) Dealing with any issues or problems that arise. d) Acquire any relevant knowledge that will be useful for future w ork. This will include, for example, the project duration, the project cost, the problem areas, and the successful areas. This information will be particular relevance when planning future upgrade project, such as form Windows 7 to Windows 8, for example. Much of the material cited below, where it has not been specifically referenced has come from the consensus of practical industry project management experience, for which specific sources cannot be cited, if many cases some years after the event. However, one work that has been most useful is Meredith & Mantel [Project Management : A Managerial Approach, Jack R. Meredith & Samuel J. Mantel Jr., Third Edition , John Wiley & Sons, 1995, ISBN 0-471-01626-8]. This has been extensively quoted from, and the specific references are given where appropriate. Prescribed Project Management Tools a) Gantt Chart These charts, although they have been in use for many years (since 1917!), are still a key tool in managing a project. They are intend ed, in an easy-to-read form, to show both planned and actual progress towards the goals of the project, This is done through a vertical list of tasks that have to be done in order to complete the project, with the horizontal axis showing the expected timescale of the project. Gantt charts are at their most useful when they permit the expedition, sequencing and allocation of resources amongst the component tasks of the project, in addition to showing current progress (or, most commonly, the lack thereof!) of the project. The Gantt chart notation also includes the relevant symbols for designating those aspects of the project that are of most concern for the situation that is being charted. An example form the case under consideration would be the allocation of Windows-trained staff and when they will need to complete the upgrade to each of the Company’s offices. The main advantages to using Gantt charts are that, firstly, although they may contain a large amount of information, they are easy to understand. Secondly, while such charts require frequently require updating (a fairly simple process these days with tools such as Microsoft project and others like it) the maintenance process is relatively easy, providing that the tasks to be performed stay the same(!). This is a classic example of changing requirements wrecking a project(!!). The way to get around this problem in the example under consideration, will be as with all IT-related projects, to adopt a ‘bite and hold’ approach, implementing the upgrade in a series of relatively small

Waste Management Practices Of Mcdonalds Environmental Sciences Essay

Waste Management Practices Of Mcdonalds Environmental Sciences Essay McDonalds is one of the largest and most well known global fast food restaurants. Ray Kroc is the founder of the company in the year 1955. The company has been operating for 55 years and has 32000 restaurants chain in more than 117 countries. More than 75% of McDonalds worldwide outlets are operated by franchisees or affiliates (Our Company 2010). There are 1.5 million employees worldwide working to serve 50 million worldwide customers each day (McDonalds Restaurants Ltd, 2006). Over the many years, millions of people have patronage McDonalds because it is a trusted name with proven service. In returning that loyalty, McDonalds have an obligation to give back to the community (SOCIAL RESPONSIBILITY, 2010). McDonalds supports Ronald McDonald House Charities (RMHC), animal welfare, food safety and environment (SOCIAL RESPONSIBILITY, 2010). This essay shall examine how McDonalds has performed in the relation to the environment particularly waste management practices. The public of the current age are concerned about the amount of packaging and food waste produced by McDonalds restaurants (Better Packaging with McDonalds, 2009). A survey conducted by Keep Britain Tidy that about 29% of the litter waste on the Britain Street was come from the McDonalds restaurant (Gray, L 2009). Therefore, one of the best solutions taken by McDonalds is manage the waste through waste management practices, which is involving in reduction, reuse, recycling and disposal (Better Packaging with McDonalds, 2009). As one of the largest fast food restaurants worldwide, McDonalds has become an environment leader. Hence, McDonalds is determined to analyze every aspect of their business on their impact on the environment and according to the analysis and seek effective ways to enhance the environment. McDonalds is hoping to survive and stay in a cle an environment where the air, water and the earth are clean and as well build an environment sound world to the future generation (). McDonalds has done a variety of different as compared to the past and current performance. In the past, McDonalds used the polystyrene foam as packaging food. Many environmentalists dislike polystyrene foam because the production of foam will release out the chlorofluorocarbon, which can damage the atmosphere. The foam also to take long time to break down, if at all, in landfills, which is where most of it winds up because there are relatively few recycling centers ( ). Besides, McDonalds was required 46 grams of packaging in average meal- a Big Mac, fries and a shake in year 1970 (Case A: McDonalds Environmental Strategy, 1995). In addition, there was no industrial scale recycling before (Rose, 2009). Furthermore, McDonalds did not practice the exercise of converting the waste into energy. Nowadays, McDonalds has found many alternative ways to enhance the environment performance in term of the waste management practices. Firstly, McDonalds has replaced the polystyrene foam by the using paper based-wraps in order to reduce the waste volume in the waste management process (Better Packaging with McDonalds, 2009). The replacement is because of consumers demand and heeding counsel of environmental groups (Liddle, A 1990). McDonalds major markets, about 83% of the packaging used for food, beverages and other consumer purposes is made of some form of paper (McDonalds Worldwide Corporate Responsibility Report, 2006). Another is the reduced amount of material used in each item of packaging (our environment, 2008). Thirdly, McDonalds recycles packaging waste and recycles used cooking oil in waste management practices (Recycling in the restaurant Focusing on operational opportunities, 2010). Fourthly, proper disposal waste programs are been carried out to manage the food waste o nce the McDonalds cannot reduce, reuse and recycle the waste (our environment, 2008). Recent year, McDonald in UK has a trial tested out an alternative method of disposal, which by converting the food waste to energy (Managing the impacts of the leftovers, 2010). David  Fairhurst, senior vice president for McDonalds UK Northern Europe said that the converting waste to energy is encouraging that has already reduced the environmental impact in the area by 48% and significant step on achieving zero waste to landfill (Thomas, D 2009) Currently, McDonalds brings a lot impact upon the society and stakeholder. McDonalds replaces the foam to paper wraps, which make up 70% to 90% reduction in sandwich packaging volume (Better Packaging with McDonalds, 2009). Besides, McDonalds also reduce the amount of material used in the packaging, which indicate less raw material use and thus less solid waste produce (our environment, 2008). For example, in 2005, McDonalds redesigned the inside of North American fry boxes, which make up more than 1,100 tons packaging waste saved per year (McDonalds Worldwide Corporate Responsibility Report, 2006). Furthermore, McDonalds in Unite State has recycled over 17 tons of corrugate cardboard per year (Recycling in the restaurant Focusing on operational opportunities 2010). Corrugate cardboard represent around 30% of the total restaurant waste and as result of recycling, divert the amount of waste from landfills. McDonalds has an aim of achieving to recycle 100% of their corrugated cardboard (our environment, 2008). By the way, about 10% of the total restaurant wastes come from the used cooking oil and McDonalds has converted into biodiesel (our environment, 2008). McDonalds in United State has recycled approximately 13,000 pounds of used cooking oil per year. Currently, more than 80% of the used oil in Europe has transformed into biodiesel (Recycling in the restaurant Focusing on operational opportunities 2010). As a result, it is stopped the used cooking oil from send to landfills. (Please consolidate and present it in a more systematic way.) In addition, the trial of converting the waste to energy has been successfully reduction 54% percent of carbon emission as audited by the Carbon Trust (Brass, E 2009). The amount of waste save from landfill could be 65 tones if the restaurants continue implement this disposal. For the energy generate from the waste provide enough heat and electricity to the building (Managing the impacts of the leftovers, 2010). For instance, in UK the energy generate from the food waste, which able to power the 22 million light bulbs to community (Brass, E 2009). Now let focus on the advantages and disadvantages of McDonald practices in the waste management. The major advantage through the waste management practices is reduced the greenhouse gas emission. Methane especially one of the greenhouse gases which mostly generate by the landfills operation and bring harmful effects to the environment and human health. Therefore, the key factor success of lower down the gases emission is driven by the greater recycle wastes, increased amount of waste recovery and incineration combined with energy production (Improved waste management delivering climate benefits, 2008). Another advantage of the waste management practices is generated a livable environment to society (Waste Disposal Methods Advantages and Disadvantages n.d.). It is because people can exist and live in a comfort environment with free of waste. . (are there any scholarly proof to support this statement?) is to help to reduce the amount of waste. Through the waste management practices, Mc Donalds has send less waste to landfill and ultimately less waste occupy the landfill However, there are some disadvantages of the waste management practices. The major disadvantage is contaminated the environment (Waste Disposal Methods Advantages and Disadvantages n.d.). The utilities of papers as packaging especially are unfriendly to the environment in the waste management practice. It is because there will increase the environment impact in production of paper packaging item. An analysis conducted by the Franklin Associates, an independent environmental research firm that the production between polystyrene foam and paper toward the environment impact. The result show that the manufacturing of paper containers especially make up 46 percent more air pollution, 42 percent more water pollution and 75 percent more industrial waste than that of plastic. Made predominantly of air, paper requires 30 percent more energy to produce than foam (Eckhardt, A 1998). Therefore, the using of paper actually leads the pollution occur. Consequently, global warming especially occurs once the pollution getting severe and serious. Besides, the disadvantage of the waste management practices is influence the people health. The process of convert the waste to energy need go through the incineration, which may emit the harmful gases into the environment that hazardous to residents health, as the emission smoke is invisible and smelly. Undoubtedly, it brings the negative impact to s ociety (Krishna, G 2006). As conclusion, the waste management practices should be adopted to manage the waste in order to provide the healthy and clean environment to the society. The social performance of McDonalds in relation to the environment has tremendously contributed. Even though the elimination of waste from the fast food restaurants is impossible, some effective and efficiency of alternative methods should also seek in order to reduce and prevent the waste from being engulfed the earth. If the large fast food company like McDonalds does not control the waste produce from the restaurant and save the planet, people will surely perish themselves one day.

Is Huck Finn A Racist Book :: Essays Papers

Is Huck Finn A Racist Book Controversial in death as he was in life, Mark Twain has been seriously accused by some of being a "racist writer," whose writing is offensive to black readers, perpetuates cheap slave-era stereotypes, and deserves no place on today's bookshelves. To those of us who have drunk gratefully of Twain's wisdom and humanity, such accusations are ludicrous. But for some people they clearly touch a raw nerve, and for that reason they deserve a serious answer. Let's look at the book that is most commonly singled out for this criticism, the novel that Ernest Hemingway identified as the source of all American literature: The Adventures of Huckleberry Finn. For Twain's critics, the novel is racist on the face of it, and for the most obvious reason: many characters use the word "nigger" throughout. But since the action of the book takes place in the south twenty years before the Civil War, it would be amazing if they didn't use that word. A closer reading also reveals Twain's serious satiric intent. In one scene, for instance, Aunt Sally hears of a steamboat explosion. "Good gracious! anybody hurt?" she asks. "No'm," comes the answer. "Killed a nigger." But anyone who imagines that Mark Twain meant this literally is missing the point. Rather, Twain is using this casual dialogue ironically, as a way to underscore the chilling truth about the old south, that it was a society where perfectly "nice" people didn't consider the death of a black person worth their notice. To drive the point home, Twain has the lady continue: "Well, it's lucky, because sometimes people do get hurt." That's a small case in point. But what is the book really about? It's about nothing less than freedom and the quest for freedom. It's about a slave who breaks the law and risks his life to win his freedom and be reunited with his family, and a white boy who becomes his friend and helps him escape. Because of his upbringing, the boy starts out beli eving that slavery is part of the natural order; but as the story unfolds he wrestles with his conscience, and when the crucial moment comes he decides he will be damned to the flames of hell rather than betray his black friend. And Jim, as Twain presents him, is hardly a caricature. Rather, he is the moral center of the book, a man of courage and nobility, who risks his freedom -- risks his life -- for the sake of his friend Huck.

The play Refund is a light and rollicking play Essay

The thread of the one act ‘Refund’ itself is very interesting.A man about 40 is returning to his old school and demands to refund the tuition fees paid by him 18 years back for the reason that the education gave to him never proved useful and he is now no good for anything. The play comprises only a few characters – the principal, the teachers and the protoganist Wasserkopf. Wasserkopf’s mistakes act as learning ground. The protoganist is an object of wrong doings and commits all sorts of mistakes and finally gives up in the hands of the principal and the teachers. 1. Wasserkopf has a negative value i.e. determination but in doing wrong things.He is ready to do anything just to prove that his school has taught him nothing and his knowledge is negligible. 2. The protagonist’s address to his masters shows to the role players and the viewers that how important the values of respect and accuracy are. No doubts viewers especially students will laugh on such utterance but ultimately as the play advances further, this behaviour is mere mockery over the pupils who are always ready to blame others and the system. The mistake committed thus is linked up with the chain of events which finally leads to a moral teaching. 3. Here the protagonist considers himself to be very wise. But in reality it is his mistake .True wisdom is shown in the form of the masters. They are insulted at the hands of this pupil as he addresses them as ‘old stick-in-the-mud, cannibal. Hypocrite, nitwit, ass etc but they show patience and self control in teaching him a lesson. 4.Wasserkopf never worked hard and he is fired from his job because of the same reason i.e. his inability to work hard. Well at the end of the play it is ultimately proved that no doubts this ex-pupil tried to prove that his school taught him nothing, but it’s only his education which made him capable enough to calculate the correct sum in a systematic way. Therefore Wasserkopf had to suffer due to his lies and corrupt values.

How To Motivate Your Team To Write Great Content - CoSchedule Blog

How To Motivate Your Team To Write Great Content Blog Its not easy to write killer content over and over again, day after day. It is even more difficult when you arent the one writing, only guiding a team through the process. Step 1: Let your writers write! How do you motivate a team to produce better content? Or sometimes, how do you get them to produce any content at all? Bark, Beg, and Badger Usually, our first inclination is our worst. Hopefully we get better as we guide our team over time, but that doesnt stop us from badgering our writers a bit too much in the beginning.  We send reminder emails.  Sarcastic hints. Eye rolls. Yelling that tanks morale and friendships. These arent all that motivating, or successful. They rarely lead to long-term improvements. There is a better way. Ownership One of my go-to management theories for nearly everything has been the principal of ownership. When writers feel a sense of ownership on a project, they become more willing to do amazing things. They work late, they put in the extra time, and most importantly they take pride in what they do because they arent just doing it for you. They are doing it for themselves. Giving your writing team ownership in what they do gives their words power.This is powerful motivation, but it doesnt happen by accident. How do we motivate our teams? How do we give them a sense of ownership? 1. Let Them In Too many editors assume that their writers cannot be trusted. This is insulting, and makes grown adults feel like a child. Great editors move beyond this, and trust their writers first by letting them in on what we are doing. If they simply cant be trusted, then they probably shouldnt be on your team (and that is a different problem entirely).  This means that you should make them a part of your big decisions. Their opinion needs to count. It also means that your job is not to lord over them. Rather, your job is to delegate big goals, and then get out of the details and out of their way. 2. Let Them Be Them Most editors were writers first, and that makes it easy for them to meddle and place too much control over what their writers do and how they do it. Dont micro manage. Trust your writers, and let them develop their own spin, their own voice, and their own style. Of course, this doesnt mean that you withhold all restraints. Boundaries are good and necessary. Just dont be over zealous in your control, and recognize that your tendency is to go at least one step too far. 3. Create a Creative Environment When we over-extend ourselves as managers, we turn a creative process into a robotic one. We create   templates, guidelines, and standards that suck creativity out of the room. We believe that our limitations bring quality, but if they are over the top, they can do the exact opposite. Creativity is a powerful tool. We have to recognize  that our writers are creative people, and give them the opportunity to embrace it. This means that we need to be willing to let them try something new, let them explore, let them fail, and let them succeed all on their own.

Mixing Regular and Synthetic Motor Oils

Mixing Regular and Synthetic Motor Oils Heres a practical chemistry question for you: Do you know what happens if you mix regular and synthetic motor oil? Lets say the mechanic put synthetic oil in your car when you got your oil changed. You stop at a gas station and see you are running about a quart low, but all you can get is regular motor oil. Is it alright to use the regular oil or will you risk harming your engine by doing so? Mixing Motor Oil According to Mobil Oil, it should be fine to mix oils. This manufacturer states it would be unlikely anything bad would happen, such as a gel-forming from an interaction of the chemicals (a common fear), because the oils are compatible with each other. Many oils are a blend of natural and synthetic oils. So, if you are low on oil, dont be afraid to add a quart or two of synthetic oil if you are using regular oil or even regular oil if you are using a synthetic. You dont need to rush right out and get an oil change so youll have pure oil. Possible Negative Effects It is not recommended to routinely mix oils because the additives in different products may interact or the oils may become destabilized by the mixture. You may reduce or negate the properties of the additives. You could lose the benefits of the more expensive synthetic oil. So, adding regular oil to your special synthetic oil will mean youll need to get your oil changed sooner than you would have otherwise. If you have a high-performance engine, its possible it will be displeased if the (expensive) additives cant work the way they are supposed to. This may not damage your engine, but it wont help its performance. The Difference Between Regular and Synthetic Oil Both conventional and synthetic motor oils are derived from petroleum, but they can be very different products. Conventional oil is refined from crude oil. It circulates through the engine to keep it cool and prevent wear by acting as a lubricant. It helps prevent corrosion, keeps surfaces clean, and seals the engine. Synthetic oil serves the same purpose, but its tailored for higher temperature and pressure. Synthetic oil is also refined, but then its distilled and purified so that it contains fewer impurities and a smaller, select set of molecules. Synthetic oil also contains additives intended to help keep an engine cleaner and protect it from damage. The main difference between regular and synthetic oil is the temperature at which it undergoes thermal degradation. In a high-performance engine, regular oil is more apt to pick up deposits and form sludge. Cars that run hot do better with synthetic oil. For most automobiles, the only real difference youll see is that synthetic costs more initially but lasts longer between oil changes.

Health promotion Term Paper Example | Topics and Well Written Essays - 750 words

Health promotion - Term Paper Example The authors have defined health promotion within the literature review. It should be noted that the definition has not been discussed in the research paper but it rather undertakes a practical implication of the definition of health promotion (Brunero & Lamont, 2011). The working definition of health promotion in this study is that it is a process of providing individuals with ways in which they can effectively undertake prevention and treatment of a disease which is already diagnosed (mainly because it is a suggestion for health promotion at a tertiary level. The authors of the study have marked that the main purpose of health promotion within the nursing field is to align the responsibilities and goals of nursing as well as health promotion. It is noted that there is an increased burden on the nurses which can only be normalized with the help of clinical supervision at a teaching level. This will help nurses provide better services for meeting the goals of health promotion. It shou ld be noted that the authors has suggested a clinical testing or screening method which will allow nurses to make their areas of service much responsible (Brunero & Lamont, 2011). In addition, another study entitled â€Å"Determining factors in evidence-based clinical practice among hospital and primary care nursing staff† conducted by Pedro et al. also recommends health promotion plan on a primary prevention level. According to the article, health promotion is rather defined as a process which allows nurses to provide healthcare facilities with the application of evidence-based clinical practice (Pedro-Go ´mez, Morales-Asencio, Veny, & Vives, 2011). The authors have suggested that the health promotion practice will not just allow the healthcare seekers but also the healthcare practitioners to practice healthcare facilities with efficient distribution. As a matter of fact, the health promotion will serve the purpose of allowing nurses to conduct evident-based

The Pros and Cons of the Implementation of Fat Tax in the UK Essay

The Pros and Cons of the Implementation of Fat Tax in the UK - Essay Example This essay discusses that the United Kingdom is becoming ‘fat’. According to the National Health Services (NHS), obesity is one of the biggest problems confronting UK in the 21st century; obesity causes several diseases or health problems. As this problem is growing, there are many attempts to control it. There is a suggestion in the UK that a tax on junk food is the only solution to mitigate this problem. This essay critically evaluates the arguments for and against such proposal. People who support ‘fat tax’ argue that this proposal is likely to be effective because this strategy has been used to alcohol and cigarettes quite successfully. According to Jofre, the UK is considered to be the ‘fattest’ nation in Europe. In line with this, the rate of obesity in the UK is growing steadily, and time is short, which implies that ‘fat tax’ could be the perfect solution for obesity. For instance, Denmark is one of the slimmest countries in Europe because it implemented ‘fat tax’. It is also argued that ‘fat tax’ has an impact on health for it is widely known that sugar and fat are the main reason for obesity. Thus, the basis for the proposal becomes obvious. As stated by Jofre, if the public cannot take care of their health, then the government is obliged to take action. In contrast, people who are against this proposal believe that it is their choice, and not the responsibility of the government. But what are the real advantages and disadvantages of implementing ‘fat tax’ in the UK? An obvious advantage of ‘fat tax’ is the revenue it could generate. ‘Fat tax’ would probably have to be quite large so as to make a difference on food preference, producing additional revenues (Leicester & Windmeijer 2004). Such revenues could be used for obesity prevention and treatment agendas, or to fund the promotion of nutritious foods. There is logical argument for th e possible success of implementing ‘fat tax’ in order to lessen consumption of unhealthy foods. One of the main factors affecting food preference is price, together with ease, quality, and taste, and, to a lesser degree, health (Jofre 2010). ‘Fat tax’ has been proven to be successful in Denmark. However, implementing ‘fat tax’ is difficult. It is hard to determine what foods should be taxed. However, even though difficult to implement, Denmark, and other countries, have shown success in adopting ‘fat tax’. This proposal is disapproved of by other people for wrongly troubling the poor, for poor people consume higher quantities of junk foods and would hence be held back by ‘fat tax’ (Leicester & Windmeijer 2004). Yet, poor people may profit as well since price is more precious to poor people in choosing foods to eat, and thus ‘fat tax’ may result in major change in consumption behaviour for poor people in co mparison with rich ones who can buy nutritious foods. Especially, nutritious food decisions would have to be cheap and easy to get to. If not, poor people, who remain incapable of buying nutritious foods, will either be pushed to starve or shell out more to sustain a harmful diet. If obesity is a real major problem in the UK, it is more helpful to think of other ways, since the ‘fat tax’ proposal looks weak. In particular, ‘fat taxes’ that financially support obesity prevention and treatment agendas, and complaints against food businesses, appear quite financially advantageous for the individuals supporting them, such as attorneys and public health advocates, without essentially solving the obesity crisis (Press Association 2011). What’s more, a lot of people eat wisely, so why should they be burdened of the taxes intended to discipline irresponsible consumers? And there are no sure proof that obesity is caused by the failure of food businesses to in form consumers that hamburgers and ice creams are fatty foods. It appears that the most